|
WE DO DRIVEWAYS AND COMMERCIAL PARKING LOTS
:
* Professional Cleaning with a high power blower.
This will remove all the dirt and debris before sealcoating.
A wire brush will remove all deep dirt spots while power cleaning.
EDGING BOTH SIDES OF YOUR DRIVE AND IN FRONT OF YOUR GARAGE
WILL ENSURE A CLEAN FRESH LOOK.
OIL SPOTS ARE LIGHTLY TORCHED AND THEN PRIMED
ALL CRACKS ARE FILLED IN WITH COLD CRACK FILLER FOR DEEP MAJOR REPAIRS 350 HOT RUBBERIZED FILLER WILL BE APPLED.
GARAGE APRONS AND DRIVEWAY APRONS WE WILL USE HOT FILLER.
USEING A 6" EDGING BRUSH ALONG BOTH SIDE OF YOUR DRIVEWAY WILL ENSURE NO SEALER WILL GET ON YOUR COBBESTONE
AND FOR THE MIDDLE A 36"BRUSH TO FILL THE REST OF YOUR DRIVEWAY WITH A
NICE EVEN LOOK WHEN WERE DONE WE WILL BARRICADE YOUR DRIVEWAY WITH YELLOW TAPE DRYING TIME IS 1 TO 2 DAYS.
* COMMERCIAL PARKING LOTS AND LINE STRIPING
* POT HOLES ARE SAW CUT AND FILLED WITH FRESH ASPHALT
AND EDGED WITH HOT CRACK FILLER.
* ALL CRACKS ARE FILL IN WITH 350* HOT CRACK FILLER
* STRIPING
WILL IMPOVE THE OVERALL PROPERTY APPEARANCE.
|
